From start-to-finish, we are here to walk you through the proces of your homes insulation
When we start doing insulation on exterior walls, we begin by taking off 1 row of siding for each level of the house that needs insulation. After the siding has been removed, our installation crew will drill holes allowing them access to the wall cavity.
After the holes have been drilled, a hose is inserted in to the hole. Cellulose is then blown in to the wall cavity, dense packing it with insulation.
After the insulation is blown in, a wood plug is inserted in the hole and sealed with caulking. The siding is then put back in to place, and cleaned.
Your Crew was very friendly and helpful. This winter our NYSEG Gas usage is so low, it barely registers on the bar graph on our bill! Thanks Pat, Susan and Crew!